What is happening at the lab (Updated 2019/12/2)

Special events:

  • Tue 26/11 - 5PM to 7PM Fusion 360 I workshop

  • Tue 3/12 - 5PM to 7PM Advanced Arduino workshop

  • Tue 10/12 - 4PM to 7PM Demo Day #3 - Scanning Electron Microscope (SEM)

  • Wed 11/12 - 4PM to 18PM Projection Mapping II workshop

  • Christmas holiday: last open day 20/12/2019 - first open day 2/1/2020

  • Moving - From week 16 - mid april 2020 - we are moving from building 4 to buildings 9 and 37. We are not sure yet for how long moving and preparations for moving may disable access.

  • Week 9-10 (2020/03/24 - 2020/05/06) Humtek workshops for 200 students. Do not come these two weeks. Lab will be very full and there will be queue for machines and no help is available.

  • Week 14 (2020/04/20 - 2020/05/03): Performance-design workshop for 30 students. Lab will be very full and there may be queue for machines and help.

  • 5-axis CNC machining is down for service (spindle controller failure). Replacement parts have been shipped from USA. Time frame not known.

  • Thursdays are servicing the lab and machines day - no help available and some machines down for planned maintenance some of the time - but you are welcome if you are self-sufficient.

Intro hours for new users:

Hours for existing users:

  • Monday 10.00-16.00
  • Tuesday 12.00-21.00
  • Wednesday 10.00-16.00
  • (Thursday: 10.00-16.00) - servicing the lab and machines day - no help available and some machines down for planned maintenance some of the time - but you are welcome if you are self-sufficient.
  • Friday 10.00-16.00

OBS we usually eat lunch sometime between 12 and 13. CNC and laser cutting only while there is staff present, due to fire risk. 3D printing, electronics etc. is available 24/7 to trusted users.

Biofablab

  • Intro and use of the biofablab for projects -> come and ask us, and we will figure something out.
  • Open as Fablab for existing users.



Follow us on instagram @fablabruc

We have an Open Channel on Telegram.

Please join us to ask questions and connect with the community: https://t.me/FabLabRucPublic

Our Mission

Research publications

Recent projects

Facilities

FabLab RUC, Roskilde University
Universitetsvej 1, Building 4.0
4000 Roskilde, Denmark

Please read this page before calling or emailing

Phone: +45 46742055
Email: fablab@ruc.dk

General opening Hours

  • Monday: 10-16
  • Tuesday: 12-21
  • Wednesday: 10-16
  • (Thursday: 10-16 - servicing the lab and machines day - no help available and some machines down for planned maintenance some of the time - but you are welcome if you are self-sufficient.)
  • Friday: 10-16

Remember to check if anything special is going on

Deliveries - how to drive in

Join our Facebook page!